Sierra Wireless AirPrime WP75 Series, Справочник по командам AT

Страница: 109 / 300

Modem Status, Customization, and Reset Commands
Rev. 6 Oct.18 Proprietary and Confidential - Contents subject to change 109
!SRV
(notification)
WWAN network status change—Unsolicited notification
Unsolicited notification received when the WWAN network status changes.
To enable !SRV (and other notifications), use AT+WUSLMSK. See
+WUSLMSK on page 127
for details.
Notification format:
!SRV: <state>
Parameters:
<state> (Network status notifications)
•
0—No service
•
1—Limited service
•
2—Service available
•
3—Regional service
•
4—Power save
!UDINFO Return information from active USB descriptor
Return information from the active USB descriptor.
Supporting devices: WP75xx/WP8548. For WP76xx/WP77xx, use !USBINFO on page 113 .).
Password required: No
Usage:
•
Query: AT!UDINFO?
Response: VID: <vendor_id>
APP PID: <app_product_id>
BOOT PID: <boot_product_id>
Interface: <interfaceType>
Manufacturer: <manuString>
Product: <prodString>
Purpose: Display USB descriptor information.
Parameters:
<vendor_id> (Vendor ID):
•
Valid range: 0000–FFFF
<app_product_id> (Product ID used when modem is in application mode):
•
Valid range: 0000–FFFF
<boot_product_id> (Product ID used when modem is in boot loader mode):
•
Valid range: 0000–FFFF
<interfaceType> (USB interface type):
•
ASCII string:
•
"QBI"—QBI interface
•
"QMI"—QMI interface
<manuString> (Manufacturer string):
•
ASCII string (32 characters maximum)
•
Example: "Sierra Wireless, Incorporated"
<prodString> (Product string):
•
ASCII string (64 characters maximum)
•
Example: "WP8548"
Table 3-2: Modem Status Command Details (Continued)
Command Description