Sierra Wireless AirPrime WP75 Series, Справочник по командам AT

Страница: 39 / 300

Modem Status, Customization, and Reset Commands
Rev. 6 Oct.18 Proprietary and Confidential - Contents subject to change 39
!BAND
(continued)
Select/return frequency band set (continued)
Response (WP76xx/WP77xx):
Index, Name, GW Band Mask L Band Mask 1 L Band Mask 2
TDS Band Mask
<Index1>, <Name1>, <GWmask1> <Lmask1(1)> <Lmask2(2)>
<Tdsmask1>
...
<IndexN>, <NameN>, <GWmaskN> <LmaskN(1)> <LmaskN(2)>
<TdsmaskN>
<TdsBand>
...
<LBand>
...
<GWBand>
...
OK
Purpose: Display allowed <Index> values and descriptions of the associated band
sets. (<GWmask1..N>, <Lmask1..N>, and <Tdsmask1..N> will appear only
in Extended responses, and only if applicable.)
After the masks, lists of each bands comprising the masks are also shown.
Parameters:
<Index> (Index of a band set. Use the Query List command to display all supported sets)
•
Valid range: 0–13 (Hexadecimal—there are 20 possible values. By default, ‘0’
indicates ‘All bands’.)
<Name> (Name of the band set)
•
ASCII string—Up to 30 characters
<GWmask> (GSM/WCDMA bands included in the set)
•
Format: 64-bit bitmask
•
Example values (Available bands are device-dependent. Use the extended query
command to display the list of bands available for your device):
0000000000000001—BC0-A
0000000000000002—BC0-B
...
0000000080000000—BC15
0002000000000000—W9001000000000000000—B19 (850)
<Lmask>, <Lmask2> (LTE bands included in the set)
•
Format: 64-bit bitmask
•
Example values (Available bands are device-dependent. Use the extended query
command to display the list of bands available for your device.):
0000000000000001—Band 1
0000000000000002—Band 2
...
0000008000000000—Band 40
0000010000000000—Band 41
•
Note: For WP75xx, only the first <Lmask> field is used to select LTE bands. If
<Tdsmask> is also being specified, leave <Lmask2> blank (or set to 0).
(Continued on next page)
Table 3-2: Modem Status Command Details (Continued)
Command Description