manualshive.com logo in svg

Sierra Wireless AirPrime WP75 Series, Справочник по командам AT

Поделиться
Скачать
Sierra Wireless AirPrime WP75 Series Скачать руководство пользователя страница 262

AirPrime WP8548 / WP75xx / WP76xx / WP77xx AT Command Reference

262

Proprietary and Confidential - Contents subject to change

4118047

+WWAKE

Query Wakeup Event

Return a mask indicating the event(s) that have pulsed the Ring Indicator (RI) signal since the 

module was powered on or since the last time this command was successfully issued, 

whichever is most recent.
When the command is successfully issued:

•

the mask is cleared and,

•

the RI signal is de-asserted (if it is still being asserted when the command is issued)

Usage recommendations:

•

The application should poll the module immediately upon starting up to determine the 
event that triggered the RI. Some events depend upon external resources (for example, 
the network) and may terminate if not handled immediately. For example, if an incoming 
voice call is not handled in a timely manner, the network will reroute the call to voicemail.

•

The host application should issue this command immediately before powering down if the 
intention is to leave the device powered on. This resets the wakeup reason, and no "old" 
events are indicated when in fact they did not happen during the time the host application 
was powered down. This is necessary because the wakeup reason can be set, and the RI 
pin asserted during normal execution when the host application is powered on.

Notes:

•

Notification of losing or finding service implies that the module first had service, and then 
the service changed the triggering the event.

•

If an established call is dropped after the notification of an incoming call, the module does 
not reflect the dropped call in the wakeup status. The dropped call should be handled like 
a dropped call in the case where the application was monitoring the device all along.

Supporting devices:

 WP

Password required:

 No

Usage:

•

Query:

AT+WWAKE?

Response:

WWAKE: <bitmask>

OK

Purpose:

Indicate the events that pulsed the RI pin.

Parameters:

<bitmask> (Events that pulsed the RI pin)

•

See the <bitmask> parameter in 

+WWAKESET

 on page 263 for supported values.

Table 13-2: I/O Command Details (Continued)

Command

Description

Содержание AirPrime WP75 Series













































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды