Sierra Wireless AirPrime WP75 Series, Справочник по командам AT

Страница: 27 / 300

AT Password Commands
Rev. 6 Oct.18 Proprietary and Confidential - Contents subject to change 27
!SETCND Set AT command password
Change the password used for the !ENTERCND command. (Before you can change the
password using !SETCND , you must enable access to this command using !ENTERCND .)
Password required: Yes (see !ENTERCND for details)
Reset required to apply changes: No
Persistent across power cycles: Yes
Usage:
•
Execution: AT!SETCND=<“key”>
Response: OK
Purpose: Sets <“Key”> as the new password for accessing protected commands.
Parameters:
<“key”> (New password)
•
Password must be entered with quotation marks (for example,
AT!SETCND=”NewPW”).
•
Length: (WP75xx/WP85xx) 4–10 characters; (WP76xx/WP77xx) 4–15 characters
•
Supported characters: ‘0’–’9’, ‘A’–’Z’, ‘a’–’z’, special characters (e.g. “!#$%&’()*+,-./
:<>=?@”
Note: Double quotes (“) are not allowed.
•
Characters may be entered in ASCII format, or in Hex format. (For example:
“myPass3” or “ABCDEF01234”.)
Warning:
Do NOT enter a null password (that is, the <“Key”> cannot be ““) — you will NOT
be able to use password-protected commands, and will have to contact Sierra Wireless for
help to reset the password.
Table 2-2: AT Password Command Details (Continued)
Command Description