Device Settings
88
●
Mapping Service
— This determines the mapping service (for example, Google Maps
or MapQuest) that displays the GPS results (in a separate browser window).
●
Performance Value
— This specifies the amount of time the device should wait for a
satellite to be discovered.
Automatic
— The device automatically determines the most appropriate setting to
use.
Manual
— In the input field, enter the number of seconds the device should wait for
a satellite to be discovered. If this time is exceeded, an error is reported.
●
Accuracy
Automatic
— The device automatically determines the most appropriate setting to
use.
Manual
— In the input field, enter the number of meters to which the data must be
accurate.
Note:
If the value is very small (that is, very high accuracy), the fix may fail.
●
Fix Rate
— The smaller the number, the more up-to-date the location tracking will be, at
the cost of shorter battery life of the device. This setting is available only if
GPS Mode
is
set to
Continuous
.
●
Metric Units
— This specifies whether to use the metric system when displaying the
GPS results (for example, the altitude, speed, HEPE).
●
Show GPS Data
or
Hide GPS Data
— This specifies whether the GPS data should be
shown in the lower part of the window.
Wi-Fi Tab
From the
Wi-Fi
tab you can configure the Wi-Fi network, including Wi-Fi security.
Wi-Fi Tab: Network Panel
Wi-Fi Tab: Security Panel
Wi-Fi Tab: MAC Filter Panel
Wi-Fi Tab: Network Panel
From the
Network
panel of the
Wi-Fi
tab you can configure general settings of the Wi-Fi
network.
1. Log in to the home page.
2. Click
Advanced settings
(
).
3. Click
Wi-Fi > Network
.