Setting-up for operation
8
UM_SUT50_EN.doc
Security Products
06.2014
4
Setting-up for operation
4.1
Power supply
–
The wall power supply is only provided for operation in TN networks (according
to VDE 0100, part 300 or EN 60950-1). For safe operation the device must be
protected by an external overcurrent protection rated no more than 16 A.
–
The supplied wall power supply can be connected to electrical supplies with
voltages of 100 to 240 VAC (+10% / -15%) at 50/60 Hz
–
Only use wall plug adapters or wall power supplies complying with local
permissions or regulations
4.2
Environmental Conditions
–
Comply with the environmental conditions specified by the manufacturer
– operating temperature: + 5
C to 45
C
– relative humidity: 30 to 85 %, non-condensing
–
Protect the device from moisture and fluids
–
Do not expose the device to direct thermal radiation (e.g. heating devices)
–
Do not operate the device in very dusty environments
–
Do not operate the device in the neighbourhood of a strong source of
electromagnetic waves
–
Do not expose the device to mechanical shocks
