Configuration
19
UM_SUT50_EN.doc
Security Products
06.2014
The configuration capabilities from VMnetCfg2.exe vary from the implemented con-
figuration menu in some aspects:
– Passwords (PINs) can only be set and changed via implemented configuration
menu.
– Configuration of redundancy operation and changing describing text of SUT50
are possible via PC configuration, only
7.2.1
Instructions for configuration with VMnetCfg2.exe
The Program VMnetCfg2.exe is available on the Support-CD.
The integrated Help-Menu offers further information to handle the program. For configuration the the
configuration-PIN of the SUT50 should be deactivated. (see Chapter 7.1.5).
The program starts with the following screen:
After startup, the program automatically searches for all available SUT50 and other
devices in the local network, that can be configured with VMnetCfg2.exe.
The automatic search can be repeated with the button „Scan for devices“.
Is the SUT50 only accessable via a router (i.e. SUT50 is in another subnet than
PC), a manual search is required. Push the button „Manual scan“ and enter the IP
if the SUT50.
To edit the configuration, click on the device in the list and then button „Edit“.
