Mounting advices
12
UM_SUT50_EN.doc
Security Products
06.2014
5
Mounting advices
5.1
Operating modes
Together with other peripheral equipment the SUT50 is capable of a variety of
configurations and operating modes.
Not all configurations and operating modes can be described here in detail. Please refere to the
instruction manuals of the connected peripherical equipment to archieve the most efficient and secure
solution.
5.2
Overview
The following table provides an overview for the most important operating modes
of the SUT50:
Interface
Operating Mode
Periphery
Recommended configuration
LAN
SIMATRIX LAN
SIMATRIX SYS Server
Ethernet
LAN
SIMATRIX via Router
SUT50 as Console Router
Ethernet
Serial (TTY)
SIMATRIX-Polling-Mode
SIMATRIX
„TTY-Slave“
2400 Baud
Serial (RS232)
SIMATRIX Master-Mode
SIMATRIX
„TTY-Master“
2400 or 9600 Baud
5.2.1
Controlling a Siemens videomatrix
The HMI device SUT50 can be connected via TTY-interfaces „Term 1“ to „Term 8“
(depends on type and upgrading) as well as via RS232-Interfaces „COM2“ to
„COM4“.
In RS232 mode the HMI device SUT50 has to be supplied by a seperate power supply
Fig. 5
Controlling a Siemens-Videomatrix
