Configuration
20
UM_SUT50_EN.doc
Security Products
06.2014
The following screen shows the configuration of a SUT50:
Each parameter is editable with a double-click.
The information in the field „Selected device“ displays details of hardware and
software version of the device.
Click the „Transfer“ button to apply the configuration back to the SUT50.
To cancel the configuration click „Close“. All changes are discarded then.
The „Export“ button saves the current configuration to a file, which can be loaded
with the „Import“ button.
After successfully configuring the device close VMnetCfg2.exe with the key
combination „Alt-F4“ or by clicking the red „X“ in the upper right corner.
When a PIN for configuration is set in the SUT50, VMnetCfg2.exe reports „read only“. Reset the PIN in
the menu item „admin password“ to „0000“ to make the SUT50 accessible via LAN.
7.3
User configuration
The user generally will not have the permission to access the configuration menu.
Some settings are still accessable with hotkeys in normal mode.
7.3.1
Quit acoustical alert
An accoustical alert (beep or bell, depending on setup) as well as a optical status
signal (red/green flashing LED) are indicating an incoming alert. To quit the current
accoustic alert press the
Shift
key.
Notice:qQuitting the acoustic alert does not quit the alert of the videosystem,
noticeable by the flashing LED.
7.3.2
Locking the HMI device
To lock the HMI device against unauthorized use – for example when the worksta-
tion is temporarily not manned – the SUT50 can be locked with the key
combination
Shift
+
both joystick buttons.
