manualshive.com logo in svg

Siemens SONOLINE G50, Руководство по обслуживанию, Страница: 85 / 234

Поделиться
Скачать
Siemens SONOLINE G50 Скачать руководство пользователя страница 85

Siemens 

7482255 Rev 01

Page 43 of 52

October 2002

Chapter 4 - Removing and Replacing Spare Parts

2.

Position the host module on the rear side of the G50 or the G60 S. 

3.

Fasten the host module by using the four screws removed previously.

4.

Secure the rear cover onto the rear side of the G50 or the G60 S: Use the 
procedures provided in "Removing the Host Module" (page 4-41), in 
reverse order to install the cover.

5.

When connecting the cables to the host module, verify each connector 
number to prevent mis-connection that could damage the equipment.

9.4 Confirming the Operation of the Host Module

1.

Connect the system power cable to a properly grounded outlet.

2.

Connect a transducer to the G50 or the G60 S.

3.

Turn the power switch On.

4.

Turn the Standby switch On.

5.

Confirm that a B-mode image is displayed on the monitor.

6.

Press the 

F4

 key and select the 

Service

 software.

7.

Activate the Service software according to the instructions provided in "Ser-
vice Software Operation" (page 8-17).

8.

Access the "System Information Screen" (page 8-24).

9.

Verify the system serial number and the system software version.

!

Caution:

 Cables can be pinched and damaged when the host module is 

installed. Verify that no cables are pinched between the module and the edge of 
the OEM interface panel or the LED indicator panel.

!

Caution:

 Use fasteners of the correct length to prevent damage to underlying 

equipment. See "Fastener Reference" (page H-1).

Содержание SONOLINE G50











































































































































































































































Отзывы:

Нет отзывов