Siemens SONOLINE G50 Скачать руководство пользователя страница 135

Страница: 135 / 234

Siemens

7482255 Rev 01

Page 3 of 8

October 2002

Chapter 7 - Installing the Version 1.2 Software Update on the G60 S

1.1.2 Backing Up Presets

Use the following procedure to back up all presets, QuickSets, OB tables, and
formulas

Press the

Review

button to view the Study Screen.

Select the MO Disk radio button.

Select the Preset tab.

Select the Store Quicksets button.

Check the All Presets checkbox and select the Ok button.

In the

File Type

menu, select

General System Presets

Select the Store button.

Enter a file name using the keyboard: Include the date and data description
in the file name (MMDDYYGenSysPre).

Select the Ok button; select the Ok button to close the message box and to
continue.

10.

In the

File Type

menu, select

OB Tables and Formulas

11.

Select the Store button.

12.

Enter a file name using the keyboard: Include the date and data description
in the file name (MMDDYYOBTabFor).

13.

Select the Ok button; select the Ok button to close the message box and to
continue.

14.

In the

File Type

menu, select

Default Settings

15.

Select the Store button.

16.

Enter a file name using the keyboard: Include the date and data description
in the file name (MMDDYYDefSet).

17.

Select the Ok button; select the Ok button to close the message box and to
continue.

18.

In the

File Type

menu, select

Total System Configuration

19.

Select the Store button.

20.

Enter a file name using the keyboard: Include the date and data description
in the file name (MMDDYYTotSysCon).

21.

Select the Ok button; select the Ok button to close the message box and to
continue.

22.

Select the Utility tab and double-click MO and SONOLINE to view the con-
tents of the MO diskette.

Note:

Refer to the “Documentation and Storage” chapter of the System Refer-

ence manual for the preset backup procedure.

Содержание SONOLINE G50











































































































































































































































Результаты поиска

Содержание SONOLINE G50

Отзывы:

Siemens SONOLINE G50, Руководство по обслуживанию, Страница: 135 / 234

Результаты поиска

Содержание SONOLINE G50

Отзывы: