Siemens SONOLINE G50 Скачать руководство пользователя страница 147

Страница: 147 / 234

Siemens

7482255 Rev 01

Page 7 of 42

October 2002

Chapter 8 - Software

2.0 Installing or Updating the DIMAQ-IP Software

Use the following instructions to install or update the DIMAQ-IP software on the
G50 or the G60 S.

2.1 Determining the DIMAQ-IP Software Version

Perform the following steps to determine the DIMAQ-IP software version
number.

Press the

Review

key to display the Study screen.

Press the

F11

key.

At the keyboard, enter

eng

(three letters in lower case).

Press the

F11

key to display a DIMAQ-IP version window.

Record the DIMAQ-IP version information.

Select the Cancel button to exit the DIMAQ-IP version window.

2.2 Installing the DIMAQ-IP Software

Use the following instructions to install the DIMAQ-IP software on the G50 or
the G60 S.

Note:

See "Installing the Version 1.2 Software Update on the G60 S" (page 7-1)

for specific instructions covering the installation of that DIMAQ-IP software
update version 1.2 on the G60 S system.

Caution:

The original release of the G60 S contained version 1.0 system soft-

ware and version 1.022 DIMAQ-IP software. The Speed Info 011/2002/US
describes the update of the version 1.022 DIMAQ-IP software to version 1.023.

The original release of the G50 contains version 1.2 system software and ver-
sion 1.2 DIMAQ-IP software.

On existing G60 S systems, the version 1.0 system software will operate accept-
ably with both the version 1.023 DIMAQ-IP software and the version 1.2
DIMAQ-IP software; to avoid problems

, update the version 1.022 or 1.023

DIMAQ-IP software to version 1.2,

before

updating the system software to ver-

sion 1.2.

Caution:

Installation or upgrade of the DIMAQ-IP software will over-write all

data on the HDD. Before beginning the installation of DIMAQ-IP software, back
up all customer data that must be maintained, to a CD.

Содержание SONOLINE G50











































































































































































































































Результаты поиска

Содержание SONOLINE G50

Отзывы:

Siemens SONOLINE G50, Руководство по обслуживанию, Страница: 147 / 234

Результаты поиска

Содержание SONOLINE G50

Отзывы: