Siemens SONOLINE G50 Скачать руководство пользователя страница 112

Страница: 112 / 234

Page 2 of 22

7482255 Rev 01

Siemens

October 2002

Verifying the System Operation

1.0 Verifying the System Operation

Use the following methods to verify that the G50 or the G60 S is operating
properly.

See

Instructions for Use

for detailed operating instructions.

1.1 Verifying the Operation of the System

Connect the power cable to the wall outlet.

Connect a transducer to the ultrasound system.

Turn the power switch On.

Turn the Standby switch On.

Confirm that a B-mode image is displayed on the monitor.

Verify that a Color flow image is displayed on the monitor.

Verify that the Doppler spectrum is displayed on the monitor.

Verify that the ECG trace is displayed on the monitor.

1.2 Verifying the Operation of the Peripherals

Use the following instructions to verify the operation of peripherals attached to
the G50 or the G60 S.

Turn on the power switch of the P91W printer.

Press

to display the Menu screen on the monitor.

Move the trackball upward and select

Customize Keys

from the left frame

displayed on the screen.

Press

SET

In the right frame of the displayed screen, select

B/W Print

for

PRINT/STORE 1

key.

Move the cursor to the radio button labeled B/W Print, and press

SET.

Select

B/W Printer for Set Up

for

PRINT/STORE 1

key and press

SET

Select Save and press

SET

Press

PRINT/STORE 1

10.

Confirm that the B-mode image on the monitor is printed correctly on the
P91W printer.

11.

Turn on the power switch of the CP900 color printer.

12.

Press

to display the Menu screen on the monitor.

13.

Move the trackball upward and select

Customize Keys

from the submenu.

14.

Press

SET

Содержание SONOLINE G50











































































































































































































































Результаты поиска

Содержание SONOLINE G50

Отзывы:

Siemens SONOLINE G50, Руководство по обслуживанию, Страница: 112 / 234

Результаты поиска

Содержание SONOLINE G50

Отзывы: