Siemens SONOLINE G50 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 234

Siemens SONOLINE G50 Скачать руководство пользователя страница 2

Page ii

7482255 Rev 01

Siemens

October 2002

G50 and G60 S - Service Manual

Copyright

This document and its contents may not be copied, duplicated, reproduced,
translated, or converted to any electronic or machine-readable form in whole or
in part without prior written approval and authorization of Siemens Medical
Solutions USA, Inc.

Disclaimer

The installation and service of equipment described herein is to be performed
by qualified personnel who are employed by Siemens or one of its affiliates or
who are otherwise authorized by Siemens or one of its affiliates to provide such
services.

Assemblers and other persons who are not employed by or otherwise directly
affiliated with or authorized by Siemens or one of its affiliates are directed to
contact one of the local offices of Siemens or one of its affiliates before attempt-
ing installation or service procedures.

Siemens reserves the right to change system specifications at any time.

Trademarks

SONOLINE and

syngo

are registered trademarks of Siemens AG. DIMAQ,

SieScape, 3-Scape, Ensemble, Crescendo, microCase, Multi-D, MultiHertz,
QuickSet, SuppleFlex, and microCase are either registered trademarks or
trademarks of Siemens Medical Solutions USA, Inc.

CIDEX, Metricide, Omnicide, Klenzyme and Centronics are registered trade-
marks of their respective owners.

Microsoft, Windows, Windows CE, and Windows NT are registered trademarks
of Microsoft Corporation in the United States and/or other countries. Adobe,
Acrobat, and Reader are registered trademarks of Adobe Systems Incorpo-
rated.

«
1
2
3
4
...
»

Содержание SONOLINE G50











































































































































































































































Отзывы:

Нет отзывов