manualshive.com logo in svg

Siemens SONOLINE G50, Руководство по обслуживанию, Страница: 136 / 234

Поделиться
Скачать
Siemens SONOLINE G50 Скачать руководство пользователя страница 136

Page 4 of 8

7482255 Rev 01

Siemens 

October 2002

Installing the Version 1.2 Software Update

23.

Verify that the stored files appear on the diskette: Service Data Backup, 
MMDDYYGenSysPre, MMDDYYOBTabFor, MMDDYYDefSet, and MMD-
DYYTotSysCon.

24.

Select Exit.

25.

Eject and store the MO diskette.

1.2 Installing the Version 1.2 DIMAQ-IP Software Update

Use the following steps to install the version 1.2 DIMAQ-IP software update.

1.

Energize the G60 S.

2.

Press the 

Review

 key to display the Study screen.

3.

Press the 

F11

 key.

4.

At the keyboard, enter 

eng 

(three letters in lower case).

5.

Press the 

F11

 key to display a DIMAQ-IP version window.

6.

Record the DIMAQ-IP version information.

7.

Select the Cancel button to exit the DIMAQ-IP version window.

8.

If the DIMAQ-IP version is 1.2, the version 1.2 DIMAQ-IP update need not 
be installed: Continue with "Installing the Version 1.2 System Software 
Update" (page 7-6).

9.

Back up all exam and patient data to a CD before continuing with the 
DIMAQ-IP software update.

10.

Open the upper-rear panel of the system to expose the Microsoft Windows 
label attached to the DIMAQ-IP.

11.

Record the 20 characters of the Microsoft Windows 2000 Product Identifi-
cation code; this license code is required to enable the new software.

12.

Close the upper-rear panel.

13.

Press the 

F4

 key and select the 

Service

 menu item.

14.

Enter the service password and select the Ok button to display the Main 
Menu screen.

!

Caution:

 The original release of the G60 S contained version 1.0 system soft-

ware and version 1.022 DIMAQ-IP software. The Speed Info 011/2002/US 
describes the update of the version 1.022 DIMAQ-IP software to version 1.023. 

On existing G60 S systems, the version 1.0 system software will operate accept-
ably with both the version 1.023 DIMAQ-IP software and the version 1.2 
DIMAQ-IP software; to avoid problems

, update the version 1.022 or 1.023 

DIMAQ-IP software to version 1.2, 

before

 updating the system software to ver-

sion 1.2.

!

Caution:

 Update of the DIMAQ-IP software will over-write all data on the HDD. 

Before beginning the installation of the DIMAQ-IP software update, back up all 
customer exam and patient data to a CD.

Содержание SONOLINE G50











































































































































































































































Отзывы:

Нет отзывов