Siemens SMIINV215R60XX, Инструкция по установке и эксплуатации

Страница: 4 / 34

Page 4 Copyri
Important Safety Information
Read this First
This manual contains important instructions for use during installation and maintenance
of the Siemens SMIINV215R60
Symbol Legend
To reduce the risk of electrical shock, and to ensure the safe installation and operation of
the Siemens Microinverter, the following safety symbols appear throughout this document
to indicate dangerous conditions and important safety instructions.
DANGER
Hazardous vo
working on this equipment. This indicates a situation where the present voltage could
cause injury or death. Extreme caution is required when servicing or installing the
equipment referenced.
WARNING
! This indicates a situation where failure to follow instructions may be a safety
hazard or cause equipment malfunction. Use extreme caution and follow instructions
carefully.
NOTE : This indicates information particularly important for
Follow instructions closely.
Safety Instructions
Perform all electrical installations in accordance with all local electrical codes and the
National Electrical Code
Be aware that only qualified personnel s
Do not attempt to repair the
fails, please contact Siemens
replacement process. Tampering with or opening the
warranty.
Before installing or using the
cautionary markings in the technical description and on the
and the Photovoltaic (PV
Connect the Siemens Microinverter to the electrical utility grid only after receiving prior
approval from the utility company.
Be aware that the body of the
temperature of 80
°
C (176
Do NOT disconnect the PV module from the Siemens Microinverter without first removing AC
power. Disconnect AC power by disengaging the circuit breaker or disconnect before the first
inverter connection.
Copyright 2011 Siemens Industry, Inc.
Important Safety Information
This manual contains important instructions for use during installation and maintenance
SMIINV215R60XX Microinverter.
sk of electrical shock, and to ensure the safe installation and operation of
Microinverter, the following safety symbols appear throughout this document
to indicate dangerous conditions and important safety instructions.
Hazardous voltage. Will cause death or serious injury. Turn off Power before
working on this equipment. This indicates a situation where the present voltage could
cause injury or death. Extreme caution is required when servicing or installing the
nced.
! This indicates a situation where failure to follow instructions may be a safety
hazard or cause equipment malfunction. Use extreme caution and follow instructions
: This indicates information particularly important for optimal system operation.
Follow instructions closely.
Perform all electrical installations in accordance with all local electrical codes and the
National Electrical Code
R
(NEC), ANSI/NFPA 70.
Be aware that only qualified personnel should install and/or replace Siemens
Do not attempt to repair the Siemens Microinverter; it contains no user-serviceable parts. If it
Siemens customer service to obtain an RMA number and start the
Tampering with or opening the Siemens Microinverter will void the
Before installing or using the Siemens Microinverter, please read all instructions and
cautionary markings in the technical description and on the Siemens Microinverter System
PV) array.
Microinverter to the electrical utility grid only after receiving prior
approval from the utility company.
Be aware that the body of the Siemens Microinverter is the heat sink and can reach a
C (176
°
F). To reduce risk of burns, do not touch.
Do NOT disconnect the PV module from the Siemens Microinverter without first removing AC
power. Disconnect AC power by disengaging the circuit breaker or disconnect before the first
141-00015, Rev 01
This manual contains important instructions for use during installation and maintenance
sk of electrical shock, and to ensure the safe installation and operation of
Microinverter, the following safety symbols appear throughout this document
ltage. Will cause death or serious injury. Turn off Power before
working on this equipment. This indicates a situation where the present voltage could
cause injury or death. Extreme caution is required when servicing or installing the
! This indicates a situation where failure to follow instructions may be a safety
hazard or cause equipment malfunction. Use extreme caution and follow instructions
optimal system operation.
Perform all electrical installations in accordance with all local electrical codes and the
Siemens Microinverters.
serviceable parts. If it
customer service to obtain an RMA number and start the
Microinverter will void the
Microinverter, please read all instructions and
Microinverter System
Microinverter to the electrical utility grid only after receiving prior
Microinverter is the heat sink and can reach a
Do NOT disconnect the PV module from the Siemens Microinverter without first removing AC
power. Disconnect AC power by disengaging the circuit breaker or disconnect before the first