Programming and Operating Manual (Milling)
6FC5398-4DP10-0BA1, 01/2014
249
4.
Press this softkey to open the contour editor.
5.
Define a start point with the following parameters and press this softkey to confirm.
●
Programming plane: G17
●
X: 5.67 abs.
●
Y: 0
6.
Press this softkey to select a contour element of straight horizontal line.
7.
Enter the parameters for this element and press this softkey to confirm.
●
X: -93.285 abs.
8.
Press this softkey to select a contour element of straight line in any direction.
9.
Enter the parameters for this element and press this softkey to confirm.
●
X: -43.972 inc.
●
α1:
-125 °
10. Press this softkey to select a contour element of straight line in any direction.
11. Enter the parameters for this element and press this softkey to confirm.
●
X: 43.972 inc.
●
α1:
-55 °
12. Press this softkey to select a contour element of straight horizontal line.
13. Enter the parameters for this element and press this softkey to confirm.
●
X: 5.67 abs.
14. Press this softkey to select a contour element of circular arc.
15. Enter the parameters for this element and press this softkey to select the desired contour
characteristics.
●
Direction of rotation: clockwise
●
R: 72
●
X: 5.67 abs.
●
Y: 0 abs.
16. Press this softkey to confirm.
