Siemens SINAMICS V50, Руководство по эксплуатации

Страница: 11 / 91

Installation
10
SINAMICS V50 converter
Operating Instructions, 04/2022, FW V1.0, A5E44777205B AB
4.3 Wiring preparation for driver
SINAMICS V50 wiring preparation
Dismantled/mounted keypad: Push out keypad like fig. below (1), then take off it
along the ‘P’ direction. Mount it along the opposite direction.
Wiring preparation: Loosen the clip 3/4, then open along the ‘O’ direction, take off
along the ‘P’ direction.
Take off along the opposite direction.
SINAMICS V50 Metal-sheet enclosure type A.
The АС -in and AC-out of some drivers are at two sides of driver.
Dismantling covert: dismantle the screw 1/2, open covert along ‘O’ direction, and
take off it along ‘P’ direction.
Dismantling cover2: dismantle the screw 3/4, open cover2 along ‘O’ direction, take
off it along ‘P’ direction.
SINAMICS V50 Metal-sheet enclosure type
В .
Dismantling cover: dismantle the screw 3/4, open cover2 along ‘O’ direction, take off
it along ‘P’ direction. The wiring holes at two sides of driver, break it to create holes
for wiring