8.4.19
6ES5 482-4UA11 Digital
Input/Output Module
Rated supply voltage L+
24 V DC
Rated input voltage
24 V DC
Inputs
Number of inputs
16 min., 24 max.
Isolation
Yes, 1 group of 32 inputs/outputs
Input voltage
for logic 0
for logic 1
- 33 to 5 V
13 to 33 V
Rated input current
8.5 mA typical
Delay time
0.3 ms typical
Input resistance
2.8 kilohms typical
Coincidence factor (total load capability)
100 %
Permissible line length
50 m max.
Supply voltage for 2-wire BERO
22 V to 33 V
Power supply
Digital section from system bus
5 V, 80 mA typical
Outputs
Number of outputs
8 min., 16 max., short-circuit protected
1)
Isolation
Yes
Fusing
6.3 A slow,
1 fuse per 8 outputs
Output voltage
for logic 1
for logic 0
L+ - 1.5 V min.
3 V max.
Switching current
(resistive, inductive load)
5 mA to 0.5 A
Switching frequency
with resistive load
with inductive load
120 Hz max.
2 Hz max. at 0.3 A, 0.5 Hz max. at 0.5 A
Breaking voltage (inductive)
Limited to L+ and - 27 V
Total switching current
4 A max. per 8 outputs
Coincidence factor (total load capability)
ventilated
not ventilated
100 %
50 %, 100 % up to 35
o
C
Permissible line length
400 m max.
Current consumption from L+/L-
24 V, 150 mA typical
Short-circuit monitoring
Indicator for signalling output (H+)
Red LED for every 8 outputs
Output voltage
referred to L- (supply of 1L+)
for logic 1
for logic 0
1L+ - 5 V min.
3 V max.
Switching current
10 mA max. current limiting
Enable input (F+/F-)
Jumper in front connector
Voltage test to VDE 0160
Between group and ground point: 1250 V AC
Mechanical specifications
Dimensions (W x H x D)
20 mm x 255 mm x 195 mm
Weight
Approx. 0.4 kg
1) Short-circuit protection responds at line resistance
≤
15 ohms
Specification Sheets for the Modules
System Manual
8 - 72
C79000-B8576-C199-03
