Siemens SIMATIC RF640A Скачать руководство пользователя страница 374

Страница: 374 / 490

Transponder

7.7 SIMATIC RF610T ATEX

SIMATIC RF600

374

System Manual, 11/2018, J31069-D0171-U001-A21-7618

Delivery format

SIMATIC RF610 T ATEX is supplied in the following form:

●

500 transponders per packaging unit
Minimum order quantity: 1 packaging unit (1 000 units)

NOTICE
Approved use
This device/system may only be used for the applications described in the catalog and the

technical documentation "System manual SIMATIC RF600

(

https://support.industry.siemens.com/cs/ww/en/ps/15069/man

)" and only in combination

with third-party devices and components recommended and/or approved by Siemens.

7.7.3

Use of the transponder in hazardous areas

In a conformity declaration, TÜV NORD CERT GmbH has confirmed compliance with the

essential health and safety requirements relating to the design and construction of

equipment and protective systems intended for use in hazardous areas as per Annex II of

the directive 2014/34/EU.
The essential health and safety requirements are satisfied in accordance with standards

EN 60079-0: 2012 + A11: 2013, EN 60079-11: 2012.
This allows the RF610T special variant ATEX transponder to be used in hazardous areas for

gases, for the device category 3 G and gas group IIB, or alternatively in hazardous areas for

dusts, for the device category 3 D and group IIIB.

WARNING

Ignitions of gas-air mixtures or dust-air mixtures
The SIMATIC RF610T transponder must be set up and maintained in such a way that

electrostatic discharges are excluded.
The SIMATIC RF610T transponder may not be installed in areas influenced by processes

that generate high electrostatic charges.

Содержание SIMATIC RF640A











































































































































































































































































































































































































































































































Результаты поиска

Содержание SIMATIC RF640A

Отзывы:

Бренды по названию

Популярные бренды

Siemens SIMATIC RF640A, Системное руководство

Результаты поиска

Содержание SIMATIC RF640A

Отзывы:

Бренды по названию

Популярные бренды