Siemens SIMATIC NET SCALANCE X-100 Series Скачать руководство пользователя страница 47

Страница: 47 / 74

Installation, connecting up, sources of problems

4.2 Connecting up

SCALANCE X-100
Operating Instructions, 04, A2B00060666D

Table 4- 2

Pin assignment of the signaling contact

SCALANCE X-100
Pin number

Assignment

Pin 1

Pin 2

The following errors/faults can be signaled by the signaling contact:
●

The failure of a link at a monitored port.

●

The failure of one of the two monitored power supplies.

The connection or disconnection of a communication node on an unmonitored port does not

lead to an error message.
The signaling contact remains activated until the error/fault is eliminated or until the current

status is applied as the new desired status using the button.
When the device is turned off, the signaling contact is always activated (open).

4.2.3

Grounding

Installation on a DIN rail

The device is grounded over the DIN rail.

S7 standard rail

The device is grounded over its rear panel and the neck of the screw.

Wall mounting

The device is grounded by the securing screw in the unpainted hole.
Please note that the SCALANCE X-100 must be grounded over one securing screw with

minimum resistance.
If a device of the SCALANCE X100 product line is mounted on a non-conducting base, a

grounding cable must be installed. The grounding cable is not supplied with the device.

Connect the paint-free surface of the device to the nearest grounding point using the

grounding cable.

Содержание SIMATIC NET SCALANCE X-100 Series











































































Результаты поиска

Содержание SIMATIC NET SCALANCE X-100 Series

Отзывы:

Похожие инструкции для SIMATIC NET SCALANCE X-100 Series

Бренды по названию

Популярные бренды

Siemens SIMATIC NET SCALANCE X-100 Series, Руководство по эксплуатации

Результаты поиска

Содержание SIMATIC NET SCALANCE X-100 Series

Отзывы:

Похожие инструкции для SIMATIC NET SCALANCE X-100 Series

Бренды по названию

Популярные бренды