Siemens SIMATIC NET SCALANCE X-100 Series Скачать руководство пользователя страница 2

Страница: 2 / 74

Legal information
Warning notice system

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent

damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert

symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are

graded according to the degree of danger.

DANGER

indicates that death or severe personal injury will result if proper precautions are not taken.

WARNING

indicates that death or severe personal injury may result if proper precautions are not taken.

CAUTION

with a safety alert symbol, indicates that minor personal injury can result if proper precautions are not taken.

CAUTION

without a safety alert symbol, indicates that property damage can result if proper precautions are not taken.

NOTICE

indicates that an unintended result or situation can occur if the corresponding information is not taken into

account.

If more than one degree of danger is present, the warning notice representing the highest degree of danger will

be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to

property damage.

Qualified Personnel

The product/system described in this documentation may be operated only by personnel qualified for the specific

task in accordance with the relevant documentation for the specific task, in particular its warning notices and

safety instructions. Qualified personnel are those who, based on their training and experience, are capable of

identifying risks and avoiding potential hazards when working with these products/systems.

Proper use of Siemens products

Note the following:

WARNING

Siemens products may only be used for the applications described in the catalog and in the relevant technical

documentation. If products and components from other manufacturers are used, these must be recommended

or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and

maintenance are required to ensure that the products operate safely and without any problems. The permissible

ambient conditions must be adhered to. The information in the relevant documentation must be observed.

Trademarks

All names identified by ® are registered trademarks of the Siemens AG. The remaining trademarks in this

publication may be trademarks whose use by third parties for their own purposes could violate the rights of the

owner.

Disclaimer of Liability

We have reviewed the contents of this publication to ensure consistency with the hardware and software

described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the

information in this publication is reviewed regularly and any necessary corrections are included in subsequent

editions.

Siemens AG

order number: A2B00060666D

Industry Sector

Ⓟ 07/2010

Postfach 48 48

Technical data subject to change

90026 NÜRNBERG
GERMANY

Содержание SIMATIC NET SCALANCE X-100 Series











































































Результаты поиска

Содержание SIMATIC NET SCALANCE X-100 Series

Отзывы:

Похожие инструкции для SIMATIC NET SCALANCE X-100 Series

Бренды по названию

Популярные бренды

Siemens SIMATIC NET SCALANCE X-100 Series, Руководство по эксплуатации

Результаты поиска

Содержание SIMATIC NET SCALANCE X-100 Series

Отзывы:

Похожие инструкции для SIMATIC NET SCALANCE X-100 Series

Бренды по названию

Популярные бренды