Siemens SIMATIC NET SCALANCE X-100 Series Скачать руководство пользователя страница 6

Страница: 6 / 74

Introduction

SCALANCE X-100

Operating Instructions, 04, A2B00060666D

Standards and approvals

The Industrial Ethernet switches of the SCALANCE X-100 product line meet the

requirements for the CE, UL, C-Tick, FM and ATEX marks. You will find detailed information

in the section "Approvals and Markings" in this commissioning manual in the "Approvals"

table.

Note
The specified approvals apply only when the corresponding mark is printed on the product.

What is possible?

The devices of the SCALANCE X100 product line allow the cost-effective installation of

Industrial Ethernet bus and star structures with switching functionality. The

SCALANCE X104-2, SCALANCE X106-1 and SCALANCE X112-2 also allow the switchover

between electrical/optical media. SCALANCE X devices with the suffix PoE also allow the

supply of power to end devices over Ethernet cables with Power-over-Ethernet complying

with 802.3af.

Note
It is not possible to use devices of the SCALANCE X-100 product line in a redundant ring

because they do not support redundancy.

Note
If devices of the SCALANCE X-100 product line are supplied over long 24 V power supply

lines or networks, measures are necessary to prevent interference by strong electromagnetic

pulses on the supply lines. These can result, for example, as a result of lightning or large

inductive loads.
One of the tests to attest the immunity of devices of the SCALANCE X-100 product line to

electromagnetic interference was the "surge immunity test" according to EN61000-4-5. This

test requires overvoltage protection for the power supply lines. A suitable device is, for

example, the Dehn Blitzductor VT AD 24 V type no. 918 402 or comparable protective

element.
Manufacturer:

DEHN+SÖHNE GmbH+Co.KG Hans Dehn Str.1 Postfach 1640 D-92306 Neumarkt,

Germany

WARNING

When used under hazardous conditions (zone 2), a switch of the SCALANCE X-100

product line must be installed in an enclosure.
To comply with ATEX95 (EN 60079-15), this enclosure must meet the requirements of at

least IP54 in compliance with EN 60529.
WARNING – EXPLOSION HAZARD: DO NOT DISCONNECT EQUIPMENT WHEN A

FLAMMABLE OR COMBUSTIBLE ATMOSPHERE IS PRESENT.

Содержание SIMATIC NET SCALANCE X-100 Series











































































Результаты поиска

Содержание SIMATIC NET SCALANCE X-100 Series

Отзывы:

Похожие инструкции для SIMATIC NET SCALANCE X-100 Series

Бренды по названию

Популярные бренды

Siemens SIMATIC NET SCALANCE X-100 Series, Руководство по эксплуатации

Результаты поиска

Содержание SIMATIC NET SCALANCE X-100 Series

Отзывы:

Похожие инструкции для SIMATIC NET SCALANCE X-100 Series

Бренды по названию

Популярные бренды