Siemens Simatic M7-400, Справочное руководство

Страница: 332 / 638

Analog Modules
5-116
S7-400, M7-400 Programmable Controllers Module Specifications
A5E00069467-07
Smoothing of the Measured Values
You fill find information that is generally applicable to the smoothing of analog
values in Section 5.6.
The following figure indicates for the module the number of module cycles after
which, in the case of a step response, the smoothed analog value is applied at
almost 100%, depending on the smoothing setting. The figure applies to every
change of signal at an analog input.
50
100
0
63
Smoothing: low:
average:
high:
Module cycles
Signal variation
in percent
Step response for any analog input signal
60 80 20 100 40
Figure 5-37 Step Response of the SM 431; AI 16 16 Bit (6ES7431-7QH00-0AB0)
Displaying Parameter Assignment Errors
The SM 431; AI 16 16 Bit has diagnostics capability. Below you will find an
overview of the displays that are possible for modules with parameter assignment
errors.
Table 5-65 Diagnostic Information of the SM 431; AI 16 16 Bit
Incorrect Parameter
Assignment
Possible Display Explanation
Of the module
•
Module malfunction
•
Internal malfunction
•
Wrong parameters
You can find an explanation of
the diagnostic information in
Tables 4-8 and 5-47 on Pages
4-10 and 5-65.
Affecting certain
channels
•
Module malfunction
•
Internal malfunction
•
There is a channel error
•
Wrong parameters
•
Channel information
available
•
Vector channel error
•
Channel parameter
assignment error
4-10 and 5-65.