Siemens SIMATIC HMI series, Системное руководство

Страница: 113 / 226

WinCC installation
Installation "WinCC client"
With the "RT Client" or "RC Client" client licenses you can operate both clients without their
own project and clients with their own project.
The program package "WinCC Client" is available to you during the WinCC installation.
The following components are installed:
● WinCC Runtime
● WinCC CS
● Basic Process Control
● SQL Express
Automatic installation with the "Record function"
The function "Central Installation" with record function allows you to perform the same
installation on multiple PCs.
During the execution of the setup, the record function records the settings and creates a
configuration file that supports you in the following installation operations. You can store the
setup centrally and start it from a network drive for this purpose.
WinCC autostart configuration via Remote access
With WinCC V7.4, you can configure the autostart function identically for multiple PCs.
The revised function "AutoStart Configuration" provides the following options:
● Autostart configuration independent of open project
● Set up autostart for the local PC
● Set up autostart for another PC in the WinCC system
● Set up WinCC logon during autostart on a client without its own project
● Set up automatic WinCC logon for all Windows users
● Temporarily deactivate autostart for a PC and activate it again
Remote maintenance via Remote Desktop Protocol (RDP)
In WinCC ServiceMode, you can access the WinCC PCs via the Remote Desktop Protocol
(RDP).
The following scenarios are released for use of RDP in WinCC ServiceMode:
● WinCC as single-user system
● WinCC as distributed system
● WinCC in redundant mode
● WinCC/WebUX server
You can also use communication via OPC in the released scenarios.
What's new in WinCC V7?
3.14 Other Innovations
WinCC: General information and installation
System Manual, 02/2017, A5E40840020-AA
113