Interrupts/diagnostic messages
6.2 Interrupts
Analog input module F-AI 4xI 0(4)..20mA 2-/4-wire HF (6ES7136-6AA00-0CA1)
Manual, 08/2018, A5E41448857-AB
57
●
Diagnostics memory overflow
●
Channel failure acknowledgment
●
F-address memory not accessible
●
No valid F-address available
●
Diagnostics memory overflow
●
Undertemperature
●
Supply voltage too high
●
Supply voltage too low
●
Channel/component not available
Scope of diagnostic interrupt: Channel
●
Diagnostics: Wire break (can only be configured for measuring range 4..20mA)
●
High limit exceeded
●
Low limit violated
●
Safety-related switch off
●
Internal supply voltage of the module failed
●
Common mode error
●
Analog input signal not recorded unique
●
Internal sensor supply short-circuit to P
●
Overload or internal sensor supply short-circuit to M
●
Discrepancy error
●
Analog input signal not recorded unique
●
Internal sensor supply short-circuit to P
●
Overload or internal sensor supply short-circuit to M
●
Read back failure
●
ADC error
●
Fault in test circuit
