Siemens SICAM, Руководство пользователя, Страница: 15 / 174

[dw_fcm_block_diagram2322, 2, en_US]
Figure 2-2 SICAM FCM Block Diagram for MLFB 6MD2322-1AA00-1AA0
Applications
SICAM FCM is used:
•
As a directional and non-directional short circuit and ground-fault detector suitable for solid, isolated, and
compensated networks in medium-voltage and low-voltage distribution systems
•
As a simple power quality meter and energy measurements in various applications
Flush Mounting
SICAM FCM can be flush-mounted in the panel and operated inside an enclosed dry room. To mount
SICAM FCM in the panel, proceed as follows:
•
Cut a rectangle in the Ring-Main Unit (RMU) panel measuring 92.0 mm + 0.8 mm × 45.0 + 0.8 mm (W ×
H).
•
Carry out all the required internal wiring connections.
For more information about terminal diagrams, refer to
3.2 Terminal Diagram .
•
Flush SICAM FCM into the panel and lock it with the clamps.
•
For more information about installation, refer to 7.2 Installing the Device .
Device Ordering Information
Use the following ordering information to order SICAM FCM and other related accessories.
Introduction
2.1 Overview
SICAM, Feeder Condition Monitor, Manual 15
E50417-H8940-C580-A4, Edition 03.2019