Siemens RUGGEDCOM RX1510 Скачать руководство пользователя

Страница: 58 / 62

Certification

6.1.3 FCC

6.1.3

FCC

This device has been tested and found to comply with the limits for a Class A digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide rea-

sonable protection against harmful interference when the equipment is operated in a

commercial environment.
This device generates, uses and can radiate radio frequency energy and, if not in-

stalled and used in accordance with the instruction manual, may cause harmful inter-

ference to radio communications. Operation of this equipment in a residential area is

likely to cause harmful interference in which case users will be required to correct the

interference at their own expense.

NOTICE

Changes or modifications not expressly approved by the party responsible for com-

pliance could void the user's authority to operate this device.

6.1.4

FDA/CDRH

This device meets the requirements of the following U.S. Food and Drug Administra-

tion (FDA) standard:
• Title 21 Code of Federal Regulations (CFR) – Chapter I – Sub-chapter J – Radiolog-

ical Health

6.1.5

ISED

This device is declared by Siemens AG to meet the requirements of the following

ISED (Innovation Science and Economic Development Canada) standard:
• CAN ICES-3 (A)/NMB-3 (A)

6.1.6

RoHS

This device is declared by Siemens AG to meet the requirements of the following Ro-

HS (Restriction of Hazardous Substances) directives for the restricted use of certain

hazardous substances in electrical and electronic equipment:
•

China RoHS 2

Administrative Measure on the Control of Pollution Caused by Electronic Informa-

tion Products

A copy of the Material Declaration is available online at

https://support.indus-

try.siemens.com/cs/ww/en/view/109738831

RUGGEDCOM RX1510

Installation Manual, 12/2019, C79000-G8976-1055-16

Содержание RUGGEDCOM RX1510































































Результаты поиска

Содержание RUGGEDCOM RX1510

Отзывы:

Похожие инструкции для RUGGEDCOM RX1510

Бренды по названию

Популярные бренды

Siemens RUGGEDCOM RX1510, Руководство по установке

Результаты поиска

Содержание RUGGEDCOM RX1510

Отзывы:

Похожие инструкции для RUGGEDCOM RX1510

Бренды по названию

Популярные бренды