manualshive.com logo in svg

Siemens RUGGEDCOM RX1510, Руководство по установке

Поделиться
Скачать
Siemens RUGGEDCOM RX1510 Скачать руководство пользователя страница 49

Modules
4.3 Installing/Removing Power Modules

Figure 4.4

Power Modules

CAUTION

Contamination hazard – risk of equipment damage

Prevent the ingress of water, dirts and other debris that may lead to premature

equipment failure. Always make sure slots are not left empty.

Note

Power modules are hot swappable. When installing/removing a power module, it is

not necessary to turn off power to the redundant power module.

Removing a Power Module

To remove a power module, do the following:

DANGER

Electrocution hazard – risk of serious personal injury or death

Make sure power to the module is turned off before servicing the power supply ter-

minal.

1. Turn off power to the module.
2. Loosen the screws that secure the module to the chassis until the module can be

removed.

2

3

1

     1    

Chassis

     2    

Screws

     3    

Power Supply

Figure 4.5

Removing a Power Supply

3. Slide the module out of the chassis.

40

RUGGEDCOM RX1510

Installation Manual, 12/2019, C79000-G8976-1055-16

Содержание RUGGEDCOM RX1510































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды