Siemens POL955, Инструкция по установке, использованию и техническому обслуживанию

Страница: 80 / 96

80 TUTORBIT
COSMOGAS
Continued on the next page
6 - USE
Parameter
Description
Access
level
Adjustment
range
Default value
Custom value
Parameters
User
System control
Antifreeze =
TutorBit ignores all heating requests and only runs the
Antifreeze function;
Heating =
TutorBit works normally for the set heating requests, also set together with HP
.
Cooling =
Tutorbit works in connection with a heat pump to make cooling.
Installer
Antifreeze; Heating; Cooling;
Modules
Heat generator operating parameters
Installer
Casc. setp of
fsetup
Increase of the module setpoint with respect to the general cascade sensor setpoint
Installer
0...20
5 K
Start hyst
Temperature dif
ferential on the cascade setpoint when heat generators are switched on
Installer
0...20
5 K
Stop hyst
Temperature dif
ferential on the cascade setpoint when heat generators are switched of
f
Installer
0...20
5 K
Light-on delay
Module switch-on delay time
Installer
0...900
180 s
Switch-of
f delay
Module switch-of
f delay time
Installer
0...900
180 s
Modulation delay
Delay time to modulation of the modules on the cascade setpoint
Installer
0...20
4 min
PID propor
. band
Proportional band of the generator output adjustment PID for controlling the cascade setpoint
Factory
0...100
40 °C
PID integral time
Integral band of the generator output adjustment PID for controlling the cascade setpoint
Factory
0...900
80 s
All Of
f Hyst
Cascade setpoint dif
ferential of switch-of
f of all modules
Installer
0...25
7.0 K
Spring
Temp.
Spring temperature for switch-of
f of the module and HP
heating function.
This parameter is only implemented
when a heating circuit is controlled by an outdoor reset (Configuration>Zones>Zone Mode> Outd Reset-R
T/
Outd Reset comp-R
T/ Outd Reset-RS)
Installer
10...40
21 °C
Modules setpoint incr
.
Increase or decrease gradient of the modules setpoint
Installer
0.1...20
2.0 d°C/s
Autumn T
emp.
COOL
function shutdown temperature for HP
Installer
10...40
28°C
DHW
DHW operating parameters
User
DHW Setpoint
Hot water tank setpoint
User
35...90
50 °C
DHW action
Manual = operation according to the setpoint; Automatic = operation according to the weekly programme; Of
f = DHW service switched of
f;
User
Manual; Automatic; Of
f;
Manual
Time program
DHW time programme
Installer
Reset
Delete time programme
Installer
No...Y
es
No
Copy
Copy time programme command
Installer
No...Y
es
No
From:
Selection of the first day to start copying
Installer
Monday
...
Sunday
Monday
To
:
Selection of the last day to end copying
Installer
Monday
...
Sunday
Monday
Monday Start Stop 06:00 8:00 12:00 14:00 18:00 22:00
Setting the 3 operating time slots on Monday
, T
uesday
, W
ednesay
,Thursday and Friday
.
Installer
Time program
Installer
Saturday
S
ta
rt S
to
p
06:00 8:00 12:00 14:00 18:00 22:00
Setting the 3 operating time slots on Saturday
.
Installer
Sunday
Setting the 3 operating time slots on Sunday
.
Installer