Siemens MXL-IQ, Руководство по эксплуатации, установке и обслуживанию

Страница: 80 / 180

3-30
Operation
List: Message
Use List Message to show the CSG-M
assigned custom message of a particular
device.
From the List menu use the Left or Right
arrow key to cause the M in MESSAGE to
start blinking:
LIST: MOD TYPE DEV TYPE MESSAGE
(If you press HELP at this point, the System
displays:
SHOW MESSAGE FOR A DEVICE
Press HELP again to return to the previous
display.)
Display the Device Message of a Specified
Device
Press ENTER when the M in MESSAGE is
blinking to select List Message.
The System asks you for a module and
device number:
TYPE IN MODULE & DEVICE:
Type the three-digit module number and
three-digit device number using the nu-
meric keypad and press ENTER. The
System displays the message for the
address specified:
069-001
[custom message]
If you press NEXT, the System displays the
message for the next device number in the
sequence:
069-002
[custom message]
With each press of NEXT, the System
continues to display device messages until
there are no more devices for that module.
To proceed to another module, follow the
preceding instructions.
Print a List of System Messages for a
Specified Module
Press PRINT when the M in MESSAGE is
blinking to select List Message. The
System asks you for a module number:
TYPE IN MODULE NUMBER:
Type only the module number and press
PRINT. (Enter all leading zeros.) The
System prints a list of all the custom device
messages for the specified module in a
format similar to the following:
Listing of Messages in Module 1 (ALD):
4-Conf.Rm 5-Cafeteria
6-Exec. Off. 1 7-Cmptr Rm
8-Exec. Off. 2 9-Camera Rm
10-Exec. Off. 3 11-Conf. Rm
(To end a menu session and return to the
Main Menu or to leave the menu at any
time, press the Up arrow key to go back-
ward one menu each time.)
List: Software Version
Use List Software Version to show:
1. System Custom Message
2. MXL-IQ Software Version
3. Version of CSG-M used to Create the
System
4. CSG-M File Name Installed
5. Date and Time of Installation
From the List menu use the Left or Right
arrow key to cause the S in S/W_VERSION
to start blinking:
LIST: S/W VERSION STATUS
(If you press HELP at this point, the System
displays:
SHOW SOFTWARE VERSION
Press HELP again to return to the previous
display.)
Display the Software Version of Your System
Software
Press ENTER when the S is blinking to
select List S/W_VERSION.