Siemens MXL-IQ, Руководство по эксплуатации, установке и обслуживанию

Страница: 75 / 180

3-25
Operation
Press ENTER to select SECURITY and
display security information on the MKB-4
display.
If There Is No Security Condition:
If there is no security condition, the System
briefly displays the following message and
then returns you to the List menu:
NO SECURITY EXISTS
If There Is a Security Condition:
If there is at least one security condition,
the System shows the most recent security
condition, alternating between the following
two displays:
1-001
[custom message]
002
[device type]
IN SEC
1-001
[custom message]
002
[time/date]
IN SEC
Press NEXT to show the two displays for the
previous security condition in the sequence.
(Pressing HOLD freezes a display for as
long as you keep HOLD depressed.)
When the System has shown all current
security conditions, it returns to the List
menu.
To obtain a full printed list of security
conditions in the following format— one
item for each current security condition—
press PRINT when the S in SECURITY is
blinking.
Listing of all Security at 14:35:20 Oct 09,20XX:
SECURTY IN 29-42 14:34:22 Oct 09,20XX
#7 [custom message], [device type]
In the above listing 29-42 is the address of
the device causing the security condition, the
time when the device caused the security
condition, #7 is the number of this security
condition, [custom message] is the custom
message for the device causing the security
condition, and [device type] is the type of
device causing the security condition.
To end a menu session and return to the
Main Menu or to leave the menu at any time,
press the Up arrow key to go backward one
menu each time.
List: Trouble
The List Trouble function shows you all the
troubles currently in the System in the order
they occurred.
From the List menu, use the left or right
arrow key three times to cause the T in
TROUBLE to blink.
(If you press HELP at this point, the System
explains the List Trouble function:
SHOW INDIVIDUAL TROUBLE STATUS
Press HELP again to return to the List
menu.)
Press ENTER to select TROUBLE and
display trouble information on the MKB-4
display.
If There Is No Trouble:
If there is no trouble, the System briefly
displays the following message and then
returns to the List menu:
NO TROUBLE EXISTS.
If There Is a Trouble:
If there is at least one trouble, the System
shows the most recent trouble, alternating
between the following two displays:
1-001
[custom message]
002
[trouble type]
IN TBL
1-001
[device type]
002
[time/date]
IN TBL
Press NEXT to show the two displays for the
previous trouble in the sequence. (Pressing
HOLD freezes a display for as long as you
keep HOLD depressed.)
When the System has shown all current
troubles, it returns to the List menu.
To obtain a full printed list of troubles in
the following format—one item for each
current trouble—press PRINT when the T
in TROUBLE is blinking.