Siemens MAG 1100, Руководство по эксплуатации, Страница: 301 / 665

7ML19981FB05 MultiRanger 100/200 – INSTRUCTION MANUAL Page 127
mmm
mm
Pa
ra
m
e
te
rs
Entering a Level Breakpoint
1. Go to Parameter P054.
2. For each index enter a breakpoint in measurement units.
3. Ensure that each breakpoint corresponds to the same index for P055.
P055 Volume Breakpoints and Characterization
(Universal Volume Calculation) [MR 200]
Each segment defined by the level breakpoints (P055) requires a volume so that the
MultiRanger can make the level-to-volume calculations.
Typical volume calculations
Entering a Volume Breakpoint
1. Go to Parameter P055.
2. For each index enter a volume.
3. Ensure that each volume corresponds to the same index for P054.
For more on
Volume Characterization
, go to page 51.
Display and Reading (P060 to P062)
These parameters are used to:
• Change the number of decimal places displayed
• Convert the Reading to alternate units
• Reference measurements to other than Empty (P006) or Span (P007)
Primary Index
Level
Secondary Index
Breakpoint
Values
Range: 0.0 to 9999
Related
• P054 Breakpoints Levels (Universal Volume Calculation)
Cone Cylinder
V = (1/3)
π
r
2
h V =
π
r
2
h