07.96
Description
vi
6ZB5 430–0BH02–1AA0
Siemens AG 1996 All Rights Reserved
SINUMERIK 805SM / 840C (BS)
Technical notes
Before start–up, please set the assignments on the module and on the front
panel as required for the application or check that they are set.
The IM 328–N module can be operated as a slave in the ET 200 Distributed
I/O System.
From the point of view of the control, the module responds like an I/O mo-
dule.
The modules
IM 328–N, Slave, MLFB: 6FC5 012–0CA03–0AA0 (IM 328–N, new)
IM 328–N, Slave, MLFB: 6FC5 012–0CA01–0AA0 (IM 328–N, old), and
IM 329–N, Slave, MLFB: 6FC5 012–0CA02–0AA0 (master and slave)
have different applications as follows:
Table 1-1
Different applications between IM 328–N and IM329–N
Module
Use as
IM 328–N
(... 0CA03 ...)
IM 328–N
(... 0CA01 ...)
IM 329–N, Slave
(... 0CA02 ...)
Slave
for SINEC L2–DP to
V3.x
X
X
Slave
for SINEC L2–DP
(PROFIBUS–DP,
acc. to DIN E 19245,
part 3)
X
X
Master
X
For information on the IM 329–N see:
Reference:
/7/, Description
Link to SINEC L2–DP with IM 329–N Module
SIMATIC
, SINEC
and SINUMERIK
are registered trademarks of
SIEMENS AG.
Checking the
assignments
Operating the
module
Response of the
module
Difference between
the IM 328–N and
IM 329–N modules
Trademarks
