Siemens i-3, Руководство по установке

Страница: 7 / 36

5
Chapter 2
Receiving, handling and storage
Shipping damage claim procedure
Note: Failure to identify and document
visible shipping damage prior to signing
the delivery receipt may negatively affect
the outcome of a damage claim. Notifying
the carrier of concealed damage within the
15-day limit is essential to avoid any loss
resulting from unsettled claims.
Handling
The P1 Series Lighting Panel with i-3
Control Technology V2 should be handled
with care to avoid damage to components,
the frame or its finish. Refer to
Table 2.1
for approximate weights of a single
panel with full control points which will
be helpful in determining the required
capacity of the means of handling.
Note: Estimated weight is for panelboard
with all the circuits filled with breakers and
SIPODs.
Storage
If the P1 Series Lighting Panel with i-3
Control Technology V2 is not installed and
energized immediately, it should be stored
in a clean dry area where a uniform
temperature prevents condensation.
Preferably, it should be stored in a heated
building, with adequate air circulation and
protected from dirt and water. It should
be stored where it is not subject to
mechanical damage.
If this equipment is to be stored for any
length of time prior to installation, restore
the packing for protection during that
period. Where conditions permit, leave the
packing intact until the panel is at its final
installation location.
If the equipment is to be stored in a cool
or damp area, do not completely cover
the equipment, but provide heat to
prevent moisture from condensing in
the equipment.
Table 2.1
Estimated weight of a single panelboard.
Panel Size Estimated Weight
18 Circuit Panel 77 lbs
30 Circuit Panel 98 lbs
42 Circuit Panel 119 lbs