en
Steam
16
Finishing
To switch off the appliance, turn the function selector to
Reheating
With the "Reheating
W
" type of heating, you can gently
reheat food that has already been cooked or crisp up
day-old baked goods. The added steam function is
activated automatically.
Starting
1.
Wait until the cooking compartment has cooled
down.
2.
Fill the water tank.
3.
Use the function selector to select "Reheating"
W
.
4.
Use the temperature selector to set the temperature.
The appliance starts.
Finishing
To switch off the appliance, turn the function selector to
Filling the water tank
Make that you have set the correct water hardness
:
Warning – Risk of injury and risk of fire!
Only fill the water tank with water or with the descaling
solution that is recommended by us. Do not pour any
flammable liquids (e.g. alcoholic drinks) into the water
tank. Due to hot surfaces, vapours from flammable
liquids may catch fire in the cooking compartment
(explosion). The appliance door may spring open. Hot
steam and jets of flame may escape.
:
Warning – Risk of burns!
The water tank may heat up while the appliance is in
operation. Wait until the water tank has cooled down
after the previous appliance operation. Remove the
water tank from the water tank recess.
Caution!
The appliance may become damaged due to the use of
unsuitable liquids.
Do not use distilled water, highly chlorinated tap water
(> 40 mg/l) or other liquids.
Only use cold, fresh tap water, softened water or
uncarbonated mineral water.
Notes
■
If your water is very hard, we recommend that you
use softened water.
■
If you only use softened water, you can set the water
hardness range to "softened".
■
If you use mineral water, set the water hardness
range to "very hard".
■
If you use mineral water, you must only use non-
carbonated mineral water.
1.
Press on the water tank (Fig.
!
).
2.
Pull out the water tank (Fig.
"
).
3.
Press the lid of the water tank down and unscrew it
(Fig.
#
).
4.
Fill with water (Fig.
$
).
5.
Screw the lid of the water tank closed (Fig.
%
).
6.
Place the water tank back in the opening and press
it down until it clicks into place (Fig.
&
).
Refilling the water tank
If the water tank is empty, an audible signal sounds and
the "Fill water tank" symbol appears on the
"Getting to know your appliance" on page 9
1.
Remove and refill the water tank.
2.
Insert the full water tank.
Note:
If you do not refill the water tank, operation
continues without steam-assisted cooking.
2
1
g
