Steam
en
23
Open the appliance door for 1 to 2 minutes so that the
moisture can escape.
Caution!
Enamel damage: Do not start any operations when
there is water on the cooking compartment floor. Before
operation, wipe away the water from the cooking
compartment floor.
Drying the cooking compartment by hand
1.
Allow the appliance to cool down.
2.
Remove any food remnants from the walls of the
cooking compartment.
3.
Dry the cooking compartment with a sponge.
4.
Leave the appliance door open for 1 hour so that the
cooking compartment dries completely.
`
Steam
Steam
With some types of heating, you can prepare food with
steam assistance. In addition, the Dough proving and
Reheating types of heating are available.
:
Warning – Risk of scalding!
When you open the appliance door, hot steam can
escape. Steam may not be visible, depending on its
temperature. When opening, do not stand too close to
the appliance. Open the appliance door carefully. Keep
children away.
Noise
Pump
You will hear a humming noise while the pump is in
operation and after switching it off. This noise is caused
by the pump function test. It is a normal operating
noise.
Control panel
You will hear a humming or clicking noise when
opening the control panel. These noises are caused by
the control panel being pushed out. They are normal
operating noises.
Steam-assisted cooking
When you cook with steam assistance, steam is
introduced into the cooking compartment at various
intervals and with varying degrees of intensity. This
gives you a better cooking result.
Your food
■
Becomes crispy on the outside
■
Develops a shiny surface
■
Is succulent and tender on the inside
■
Only undergoes a minimum reduction in volume
You set the type of heating and steam intensity
combination that you want. Use the information in the
tables to select a suitable type of heating and steam
intensity, or select a programme.
Steam intensity
Different intensity levels are available when adding
steam:
■
Low
■
Medium
■
High
Suitable types of heating
You can switch on steam assistance for these types of
heating:
■
4D hot air
:
■
Top/bottom heating
%
■
Hot air grilling
4
■
Keeping warm
R
■
Reheating
W
■
Dough proving
R
Starting
1.
Fill the water tank.
2.
Set the type of heating using the rotary selector.
3.
Touch the "Temperature" field and set the
temperature using the rotary selector.
4.
Touch the "Added steam" field and set the steam
intensity using the rotary selector.
5.
Press the Start/Stop button to start.
The appliance heats up.
Note:
If the water tank runs dry during a steam
operation, a message appears on the display
prompting you to fill up the water tank. The operation
continues without adding steam.
Cancelling steam addition
To switch off steam assistance early, touch the "Added
steam" field. Use the rotary selector to set to "Off".
Note:
The operation continues without adding steam.
Cancelling appliance operation
Touch the Start/Stop button to cancel the operation.
Finishing
Touch the On/Off button to switch off the appliance.
Reheating
With the "Reheating
W
" type of heating, you can gently
reheat food that has already been cooked or crisp up
day-old baked goods. Steam is switched on
automatically.
Note:
If the water tank runs dry during the operation
with the Reheating setting, the operation is interrupted.
Fill the water tank.
Starting
1.
Fill the water tank.
2.
Touch the Menu button.
3.
Touch the "Steaming" field.
4.
Use the rotary selector to set to "Reheating
W
".
5.
Touch the "Temperature" field and set the
temperature using the rotary selector.