Siemens HiNet LP5100, Руководство по эксплуатации и администрированию

Страница: 35 / 134

Operation
35
Programming the function keys
The HiNet LP5100 has a number of functions which you can pro-
gram to unassigned function keys according to your requirements.
You will find the functions in the menu "Service"/"Function keys"
as well as listed in the table below:
Selection Function
00=End Return to the preceding menu
01=Clear definition Clear key assignment
02=Selected dialing Assign call number to the function key
03=Abbrev. dialing Assign call number to a digit
04=Repeat dialing Repeat dialing from the list of the last 20
numbers of outgoing calls
05=Missed calls Choice of a call number from the list of
the last 20 numbers of incoming calls
06=Forwarding Forward an incoming call
07=Loudspeaker Switch on and off the loudspeaker in the
base unit
08=Mute Switch off the microphone
09=Ringer off Switch off an incoming call signal
10=Alternate Alternate between two parties
11=Transfer Transfer an incoming call
12=Deflect Deflect an incoming call
13=Service Menu Call Service menu
14=Room echoing Set room character to echoing
15=Room muffled Set room character to muffled
16=Shift key Switch over to the second level of
function keys
17=Notebook Call Notebook function
18=Status Check current status