Siemens HiNet LP5100, Руководство по эксплуатации и администрированию

Страница: 13 / 134

Display and operator’s controls
13
Programmable keys
The HiNet LP5100 is equipped with 16 user-programmable keys
in two levels, with four of these keys being preassigned in the first
level:
If you press one of these keys, the corresponding LED will go on
until the preprogrammed function is carried out.
If you call a key from the second level, press the "Shift" key first
and then the required function key.
Control keys
The two control keys and are located below the dialing key-
pad. Depending on the operating mode, you can vary the following
settings:
LED off
LED on
Operating mode key key
Receiving a call Reduce the volume
of the ringer tone Increase the volume
of the ringer tone
Handsfree talking Reduce the volume
of the loudspeaker
in the base unit Increase the volume
of the loudspeaker in
the base unit
Using the handset
to telephone Reduce the volume
of the handset
loudspeaker Increase the volume
of the handset
loudspeaker
Setting in the menu
"Service"/"Audio
Settings" Adjust loudspeaker, handset, key click and
ringer volumes,
vary the sequence and melody of the
ringer tone