Siemens HB36D.75., Инструкция по эксплуатации

Страница: 21 / 36

21
Cleaning sponge
The enclosed cleaning sponge is very absorbent. Use the
cleaning sponge only for cleaning the cooking compartment
and for removing residual water from the evaporator dish.
Wash the cleaning sponge thoroughly before using for the first
time. You can wash the cleaning sponge in the washing
machine (hot wash).
Microfibre cloth
The honeycomb microfibre cloth is particularly suitable for
cleaning sensitive surfaces such as glass, glass ceramic,
stainless steel or aluminium (product no. 460 770, also
available from our online eShop). It removes liquid and greasy
deposits in one go.
Roasting set
If possible use the roasting set when roasting (ordering
no. HEZ36DB, also available online in the eShop). This
considerably reduces the amount of spatter from the roast and
therefore the amount of soiling in the cooking compartment.
Cleaning aid
The cleaning aid loosens dirt in the cooking compartment using
steam. It can then be removed easily.
The cleaning process consists of:
■
Cleaning (approx. 30 minutes), then empty the evaporator
dish and wipe out the appliance
■
1st rinse (20 seconds), then empty the evaporator dish
■
2nd rinse (20 seconds), then remove the remaining water
All three steps must be completed in full. The appliance is
ready for operation again only after the 2nd rinse.
Preparation
Allow the cooking compartment to cool down and remove the
accessories. Clean the evaporator dish with the enclosed
cleaning sponge.
Put a drop of washing-up liquid into the evaporator dish on the
cooking compartment floor.
Starting the cleaning aid
1.
Press the
‡
button to switch on the appliance.
2.
Press the s button.
"Clean" appears in the display.
3.
Fill the water tank with water up to the "max" mark and slide it
in.
4.
Press the Start button.
The cleaning aid starts running. The light in the cooking
compartment remains switched off.
Emptying the evaporator dish and wiping out the appliance
A signal sounds after approx. 30 minutes. "Empty dish and
wipe out appliance" and "
x
0:40" appear in the display.
1.
Open the appliance door.
"Appliance ready to rinse" appears in the display.
2.
Take the rails out of the cooking compartment and clean
them (see section: Cleaning the rails).
3.
Wipe out all loosened food residues from the cooking
compartment and the evaporator dish using a soft washing-
up brush and the cleaning sponge.
4.
If required, fill the water tank with water and reinsert it.
5.
Close the appliance door.
"Continue operation with 'Start'" appears in the display.
1st rinse
Press the Start button.
The appliance starts rinsing. “1st rinse” and the cooking time
x appear in the display.
Empty evaporator dish
After 20 seconds, "Empty dish" and "
x
0:20" appear in the
display.
1.
Open the appliance door.
"Appliance ready to rinse" appears in the display.
2.
Thoroughly rinse out the cleaning sponge.
3.
Remove the remaining water from the evaporator dish using
the cleaning sponge.
4.
Close the appliance door.
"Continue operation with 'Start'" appears in the display.
2nd rinse
Press the Start button.
The appliance starts rinsing. “2nd rinse” and the cooking time
x
appear in the display.
Removing the remaining water
After 20 seconds, "Empty dish" appears in the display.
1.
Open the appliance door.
“End” and “
x
0:00” appear in the display.
2.
Remove the remaining water from the evaporator dish using
the cleaning sponge.
3.
Wipe out the cooking compartment using the cleaning
sponge and then dry with a soft cloth.
4.
Press the
‡
button to switch off the appliance.
The cleaning aid is complete.
Cancelling the cleaning aid
Note:
After cancelling the cleaning aid, the appliance must be
rinsed twice. The appliance is locked against other applications
until the second rinsing operation is complete.
1.
Press the Stop button to cancel the Cleaning aid.
“Continue operation with ‘Start’” and “Clean” appear on the
display.
To ensure that no washing-up liquid remains in the appliance,
it must be rinsed twice after a cancellation.
2.
Press the Start button.
“Empty dish and wipe out appliance” appears in the display.
3.
If required, fill the water tank with water, reinsert it and press
the Start button.
Now proceed as described in the section “Emptying the
evaporator dish and wiping out the appliance”.
Descaling
The appliance must be descaled at regular intervals in order for
it to continue operating correctly. "Descale the appliance"
reminds you of this.
You can only dispense with descaling completely if you
exclusively use softened water.
The descaling consists of:
■
Descale (approx. 30 minutes), then empty the evaporator
dish and refill the water tank
■
1st rinse (20 seconds), then empty the evaporator dish
■
2nd rinse (20 seconds), then remove the remaining water
All three steps must be completed in full. The appliance is
ready for operation again only after the 2nd rinse.
Descaler
Only use the liquid descaler recommended by the after-sales
service for descaling (product no. 311 138, also available
online from the eShop). Other descalers may damage the
appliance.