MENU MODE
CAUTION:
Use of the MENU Mode is not necessary for program-
ming or testing a device. This mode should be used
ONLY by technicians who are familiar with, and can
interpret device analog responses and who wish to
perform some troubleshooting.
The MENU mode is used to interrogate a device. Press the MENU
key to enter this mode. The Programmer/Tester displays the following
message:
Searching For
Device
CAUTION
1. TO PREVENT DAMAGE TO THE FPI-32, DO NOT CONNECT
CZM-1s, TRIs/MSIs, or ICPs/VCPs to the FPI-32 until all wiring
is removed from the CZM-1, term 1 and 2, the TRI/MSI, term 1
and 2, or the ICP/VCP, TB1, term 1 and 2.
2. Only one device should be connected to the FPI-32 at a time.
Install the device: no response necessary.
NOTE:
The Programmer/Tester is no longer equipped with polarity re-
versal for modules connected to the FPI-32 through the exter-
nal programming cable (TRI, MSI, CZM, VCP/ICP). The user
may have to manually reverse the polarity of the connect cable.
While in the
searching mode,
the FPI-32 display will periodi-
cally remind the user to check/reverse the polarity of the cable
connection.
MENU MODE
18
firealarmresources.com