8
PROGRAM MODE
Install the device: no response necessary.
NOTE:
The Programmer/Tester automatically detects the presence of
the inserted device. There is no need to depress any keypad
keys once the device has been inserted. When the device is
detected, the Programmer/Tester will respond with:
PROGRAM MODE
PLEASE WAIT...
After approximately 2 seconds the Programmer/Tester enters Step 2.
STEP 2 — VERIFYING THE DEVICE TYPE AND
ADDRESS
The Programmer/Tester displays the device type on the first line. The
recognizable device types are as follows:
CZM1
ID-60P/ID-60PT
MSI
Dual TRI
ILI-1/ILI-1H
MSI 2 Stage
FP-11
ILI-1A/ILI-1AH
New Device
FPT-11
ILI-1B/ILI-1BH
TRI
ID-60I/ID-60IH
ILP-1
VCP/ICP TZ
ID-60IA/ID-60IAH
ILP-2
VCP/ICP 25 SZ
ID-60IB/ID-60IBH
ILT-1
VCP/ICP 70 SZ
The second line displays as follows:
ADR: @1/@2, OK?
Where:
@1 = The first logical address for the device.
@2 = The second logical address for dual devices.
firealarmresources.com
