About this Document
5
Building Technologies
FL-III Maintenance and Repair
CPS Fire Safety
08.2012
1.4
Warranty and liability
Opening the controller housing and the breaking of an adhesive seal on the
housing screws voids any warranty and liability claims!
No warranty or liability is accepted for any maintenance and repair work
performed on the device, which is not performed by the manufacturer!
Fig. 1
Adhesive seal warranty
The controller has not been designed for repair work that is performed by third
parties. Repair work is to be solely performed by the manufacturer. For this, the
device is to be shipped to the technical support department of the manufacturer. In
order to prevent any damage during shipment, packaging material must be used
that is suitable for safe transport.
Maintenance and repairs may only be completed by service technicians authorised
by the manufacturer, who have completed special training on the equipment and
acquired the appropriate knowledge.
Authorised service technicians must perform and document all maintenance and
repair work in accordance with the stipulations of the ISO 9001 standard.
The manufacturer accepts no liability for damages or injuries that occur due to the
non-compliance of the instructions contained in this manual as well as additional
applicable documentation:
Usage contrary to the intended use
Use of non-original parts or spare parts
Unauthorised modification of the device without the written permission of the
manufacturer
Use of unauthorised accessories
Insufficiently documented maintenance and repair work
1.5 Legal
notices
We have reviewed the contents of this publication to ensure consistency with the
hardware and software described herein. Since variance cannot be precluded
entirely, we cannot guarantee full consistency. However, the information in this
publication is reviewed regularly and any necessary corrections are included in
subsequent editions.
It is our policy to constantly improve the design and specifications. Accordingly, the
details represented in this manual cannot be regarded as final and binding.
