Repairs
30
Building Technologies
FL-III Maintenance and Repair
CPS Fire Safety
08.2012
Evaluation of the data
The data and the defective CF memory card should be submitted respectively
returned to the manufacturer of the controller for evaluation. Within the warranty
period, the replaced memory card must be returned to the manufacturer in order to
maintain the warranty. Outside of the warranty period, the memory card must at
least be stored and if any repairs are needed, it must be returned to the
manufacturer together with the controller. The data will solely be used for error
analysis and improvement of the product quality.
Replacement of the memory card
1
Switch the controller off and wait for approx. 10 seconds.
2
Remove the cover of the CF memory card slot on the interface panel (2
screws, TX8).
Fig. 16
Remove the cover of the CF memory card slot
3
Remove the adhesive seal on the CF memory card to such an extent that the
card can be removed.
4
Carefully push in the “eject” button with a suitable object (e.g. screwdriver,
TX8).
Fig. 17
Remove the memory card
CAUTION!
The warranty and liability for the controller with a broken adhesive seal on the
memory card becomes void when the replaced card(s) is (are) not returned to
the manufacturer.
5
Remove the memory card.
6
Insert the new memory card positioned correctly (capacity label facing
upwards) into the memory card slot until it engages.
7
Reinstall the cover and secure it with both screws.
