Siemens DP/AS-Interface Link 20E, Руководство пользователя

Страница: 75 / 160

Using the Command Interface
75
DP/AS-Interface Link 20E
Release 11/2002
C79000-G8976-C138–04
Table 3-5 Error Coding
DONE ERROR STATUS Meaning
1 0 0000
H
Job completed without error
0 1 8090
H
Address in LADDR invalid
0 1 8092
H
A type other than BYTE is specified in the ANY reference.
0 1 8093
H
This SFC is not permitted for the module selected with
LADDR and IOID. (S7-300 modules are permitted for
S7-300, S7-400 modules for S7-400, S7-DP modules for
S7-300 and S7-400.)
0 1 80A0
H
Negative acknowledgment when reading from AS-i master.
0 1 80A1
H
Negative acknowledgment when writing to AS-i master
0 1 80A2
H
DP protocol error at Layer 2
0 1 80A3
H
DP protocol error involving user interface/user
0 1 80A4
H
Communication problems on K bus
0 1 80B0
H
AS-i master does not recognize the data record
0 1 80B1
H
Specified data record length incorrect
0 1 80B2
H
The configured slot is not in use.
0 1 80B3
H
Actual module type does not match the expected module
type in SDB1
0 1 80C0
H
Data record cannot be read
0 1 80C1
H
The specified data record is currently being processed
0 1 80C2
H
There is a job pileup
0 1 80C3
H
Resource (memory) in use
0 1 80C4
H
Communication error
0 1 80C5
H
Distributed I/Os not available
0 1 80C6
H
Data record transfer aborted due to priority class abort
(warm restart or background) of the distributed I/Os.
0 0 8181
H
Job active (no error)
0 1 8182
H
ID following warm restart (STARTUP=TRUE)
0 1 8184
H
Data type of the RECV formal parameter illegal
0 1 8381
H
The AS-i slave address is incorrect
0 1 8382
H
The AS-i slave is not activated (not in LAS).
0 1 8383
H
Error on the AS-Interface
0 1 8384
H
Command not permitted in the current status of the AS-i
master.
0 1 8385
H
An AS-i slave with address 0 exists.
8386
H
The AS-i slave has illegal configuration data (I/O or ID
codes).
0 1 83A1
H
The addressed AS-i slave was not found on the
AS-Interface.
0 1 83A2
H
An AS-i slave with address 0 exists.