Siemens CP-8000, Руководство пользователя

Страница: 363 / 614

Engineering via SICAM WEB
SICAM A8000 / CP-8000 • CP-8021 • CP-8022 Manual Unrestricted
363
DC8-037-2.02, Edition 10.2017
Category Parameter Meaning
Cockpit_GroupNbr_(MSG) The data point is displayed in the cockpit in
this group (1…32)
Cockpit_GroupPos_(MSG) The data point is displayed in the cockpit on
this position (1…255)
SID-BSE Source identification basic system element
SID-ST Source identification station number if mul-
tipoint traffic mode 0…99 if R-SID 0…254; if
automatic, the SID will be learned
SID-SSE Source identification supplementary system
element
Protocol element control
message Control_function_(PRE)
•
0...239 = function defined by protocol ele-
ment
•
240 = GI request
•
241 = reserved
•
242 = control location
•
244 = CASDU selective GI request
•
245...255 = reserve for further BSE func-
tions
Edge_(PRE)
•
Positive edge
•
Negative edge
•
State (0 = function, 1 = fu 1)
PRE_(CM) Protocol element number
•
PRE0…PRE3
•
distribute over multimaster function
Station
•
0…99 = station number
•
125 = to all stations
•
255 = not used
Additional_parameter_(PRE) 0...65535 = meaning for each function de-
fined by the PRE firmware
SID-BSE Source identification basic system element
SID-ST Source identification station number if mul-
tipoint traffic mode 0…99 if R-SID 0…254; if
automatic, the SID will be learned
SID-SSE Source identification supplementary system
element
104-Address
TI Type identification according to
IEC 60870-5-101/104
•
Single-point information
•
Single command
Protocol element return
information message Return_information_function_
(PRE)
PRE_(RM) Protocol element number (0…3)
Station Station number (selective 0...99; to all sta-
tions; station not used)
Redundancy control
message Control_function_(RED)
•
User priority
•
A/P-control
•
Key switch
•
Listening mode-control
•
A/P-control with failed SCA-RS
•
Switch-over disabled
Failure_behavior_(RED)
•
Terminate binary information
•
Maintain status
BSE_(RED) Basic system element