Siemens CP 1243-1 Скачать руководство пользователя

Страница: 82 / 144

Configuration

4.10 Data points

CP 1243-1

Operating Instructions, 04/2017, C79000-G8976-C365-03

4.10

Data points

4.10.1

Data point configuration

Data point-related communication with the CPU

No program blocks need to be programmed for telecontrol modules with data point

configuration to transfer user data between the station and communications partner.
The data areas in the memory of the CPU intended for communication with the

communications partner are configured data point-related on the module. Each data point is

linked to a PLC tag or the tag of a data block.

Requirement: Created PLC tags and/or data blocks (DBs)

PLC tags or DBs must first be created in the CPU program to allow configuration of the data

points.
The PLC tags for data point configuration can be created in the standard tag table or in a

user-defined tag table. All PLC tags intended to be used for data point configuration must

have the attribute "Visible in HMI".
Address areas of the PLC tags are input, output or bit memory areas on the CPU.

Note
Number of PLC tags
Remember the maximum possible number of PLC tags the can be used for data point

configuration in the section Configuration limits and performance data (Page 15).

The formats and S7 data types of the PLC tags that are compatible with the protocol-specific

data point types of the module can be found in the section Datapoint types (Page 89).

Access to the memory areas of the CPU

The values of the PLC tags or DBs referenced by the data points are read and transferred to

the communications partner by the module.
Data received from the communications partner is written by the module to the CPU via the

PLC tags or DBs.

Configuring the data points and messages in STEP 7

You configure the data points in STEP 7 in the data point and message editor. You can find

this using the project tree:
Project > directory of the relevant station > Local modules > CP

Содержание CP 1243-1

















































































































































Результаты поиска

Содержание CP 1243-1

Отзывы:

Похожие инструкции для CP 1243-1

Бренды по названию

Популярные бренды

Siemens CP 1243-1, Руководство по эксплуатации

Результаты поиска

Содержание CP 1243-1

Отзывы:

Похожие инструкции для CP 1243-1

Бренды по названию

Популярные бренды