Siemens CP 1243-1 Скачать руководство пользователя

Страница: 47 / 144

Configuration

4.6 Ethernet interface

CP 1243-1
Operating Instructions, 04/2017, C79000-G8976-C365-03

4.6.3

Advanced options

TCP connection monitoring

The settings made here apply globally to all configured TCP connections of the CP.
With TeleControl Basic and DNP3:

Note the option of overwriting the values configured here for individual communications

partners, refer to the section Partner stations (Page 54).

●

TCP connection monitoring time
Function: If there is no data traffic within the TCP connection monitoring time, the CP

sends a keepalive to the communications partner.
Default setting: 180 s. Permitted range: 1...65535 s.
–

The parameter below the Ethernet interface
The monitoring time is configured for the Ethernet interface globally for all TCP

connections. The parameter is preset to 180 seconds as default.

–

The parameter below "Partner stations"
The parameter "TCP connection monitoring time" occurs again with the individual

partners in the parameter group "Connection to partner". This parameter applies only

to the individual partner. The value of 180 seconds preset on the Ethernet interface is

adopted for the individual partners.
If for any reason you want to change the value of the TCP connection monitoring time

for individual partners, you can adapt the value for every partner individually in

"Partner stations". If. for example, you want to check the connection at shorter

intervals, reduce the value.

●

TCP keepalive monitoring time
After sending a keepalive, the CP expects a reply from the communications partner within

the keepalive monitoring time. If the CP does not receive a reply within the configured

time, it terminates the connection.
Default setting: 10 s. Permitted range: 1...65535 s.
–

The parameter below the Ethernet interface
The monitoring time is configured for the Ethernet interface as a global setting for all

TCP connections.

–

The parameter below "Partner stations"
As with the TCP connection monitoring time, the value of "Partner stations" can be

adapted for each partner individually.

Содержание CP 1243-1

















































































































































Результаты поиска

Содержание CP 1243-1

Отзывы:

Похожие инструкции для CP 1243-1

Бренды по названию

Популярные бренды

Siemens CP 1243-1, Руководство по эксплуатации

Результаты поиска

Содержание CP 1243-1

Отзывы:

Похожие инструкции для CP 1243-1

Бренды по названию

Популярные бренды