Siemens CP 1243-1 Скачать руководство пользователя

Страница: 45 / 144

Configuration

4.5 Communication types

CP 1243-1
Operating Instructions, 04/2017, C79000-G8976-C365-03

Forwarding the time from the CP to the CPU

Note
Forwarding the time to the CPU
Depending on the firmware version of the modules involved, the time-of-day of the CP is

forwarded to the CPU in different ways:

•

Optional forwarding of the CP time to the CPU using a PLC tag

•

Obligatory forwarding of the CP time to the CPU via the backplane bus

The forwarding of the CP time to the CPU depends on the firmware version of the CP and

the CPU. Note the following behaviour.

●

CP firmware ≤

V2.1.6x

With this firmware version the CP can make the time-of-day available to the CPU as an

option via a PLC tag. When this PLC tag is read cyclically by the CPU, the CPU adopts

the CP time.
In the parameter group "Communication with the CPU", you can set whether or not the

current time of day of the CP will be made available to the CPU via a PLC tag. For TLC

tags, see parameter group "Communication with the CPU" of the CP.

●

CP firmware ≥

V2.1.77 and CPU firmware ≥

V4.2

If both modules in the station have the named firmware versions, the time of day of the

CP is automatically forwarded to the CPU.
Since the CPU automatically adopts the CP time, you no longer require the forwarding

option using the PLC tag.
If for the CPU the option "CPU synchronizes the modules of the device" is enabled in

"PROFINET interface > Time synchronization", all smart modules of the station are

synchronized with the CPU time.

4.5

Communication types

In this parameter group, you enable the communication types of the CP.
To minimize the risk of unauthorized access to the station via Ethernet, you need to enable

the communications services that the CP will execute individually. You can enable all options

but at least one option should be enabled.

"Communication types" parameter group

●

Enable telecontrol communication
–

TeleControl Basic

–

DNP3

–

IEC 60870-5

Note that if you change the telecontrol communication type later, all specific parameters

are deleted. These also include data point and partner information among other things.

Содержание CP 1243-1

















































































































































Результаты поиска

Содержание CP 1243-1

Отзывы:

Похожие инструкции для CP 1243-1

Бренды по названию

Популярные бренды

Siemens CP 1243-1, Руководство по эксплуатации

Результаты поиска

Содержание CP 1243-1

Отзывы:

Похожие инструкции для CP 1243-1

Бренды по названию

Популярные бренды