DIAGNOSTIC TERMINAL (DT) SOFTWARE
_________________________________________________________________________________________________________
6-12
SIG-00-07-11 SEPTEMBER 2012 (REVISED OCTOBER 2019)
Version No.: B.2
6.6.2.2
Input Logic States Display
There are three logic states for each input.
•
The first logic state represents the On/Off status of the input: 1 = On, 0 = Off.
•
The second logic state represents the flash function: 1 = Flashing, 0 = Not Flashing.
•
The third logic state represents the hardware fail status: 1 = Failed, 0 = Not Failed
NOTE
The 1 logic state corresponds to a ‘True’ statement and the 0 logic
state corresponds to a ‘False’ statement on the System States
screen shown in Figure 6-12.
The 1 logic state corresponds to a ‘True’ statement and the 0 logic state corresponds to a
‘False’ statement on the System States screen shown in Figure 6-12.
Figure 6-14 Input Logic States Display
6.6.3 On-Line Status
Select the
On-line Status
function from the View drop-down menu to view the internal VIU
status log in real-time. This listing only includes events for the current DT session (Figure 6-15).
Figure 6-15 Real-Time View of VIU Status Log